GSM stands for Global System for Mobile Communications which is a technology behind 2G networks. It is a cellular network technology enabling communication via a series of connected base stations and devices. It uses time division multiple access (TDMA) to split frequency bands into time slots, enabling multiple users to share the same frequency channel. This technology used to be widely spread within businesses to deploy their IoT and M2M devices. But as we are expecting a 2G sunsetting over coming years, it becomes less actual for IoT deployments these days.
Base Transceiver System (BTS) is responsible for managing the radio components and maintaining communication with the Mobile Station (MS).
Base Station Controller (BSC) allocates necessary time slots between the BTS and the Mobile Switching Center (MSC).
Home Location Register (HLR) is a reference database that stores subscriber parameters such as the subscriber's ID, location, and authentication key.
Visitor Location Register (VLR) comprises a temporary copy of most of the data stored in the HLR, specifically related to active subscribers within a particular area.
Equipment Identity Register (EIR) is a database that maintains a list of valid devices authorized to connect to the network.
Authentication Center (AuC) enables authentication of subscribers, ensuring the security and validity of their access to the network.
The below standards are commonly used in GSM-based IoT connectivity:
GPRS (General Packet Radio Service) which enables packet-switched data transmission. It provides an "always-on" internet connection for IoT devices in order to send and receive efficiently.
EDGE (Enhanced Data Rates for GSM Evolution) entails higher data transfer rates. IoT devices transfer and receive data at higher speeds, applicable to cases requiring more bandwidth, for instance video streaming.
SMS (Short Message Service) enables short text messages, including alerts, notifications, and commands, to the devices.
GSM incorporates TDMA (Time Division Multiple Access), FDMA (Frequency Division Multiple Access), and Frequency hopping. It used to utilize two frequency bands spanning a width of 25 MHz: the frequency band from 890 MHz to 915 MHz for up-link communication and the frequency band from 935 MHz to 960 MHz for down-link communication. Subsequently, two additional bands with a width of 75 MHz each were introduced: the up-link band ranging from 1710 MHz to 1785 MHz and the down-link band ranging from 1805 MHz to 1880 MHz. GSM splits the 25 MHz band into 124 channels, with each channel width of 200 KHz.
Technology | GSM | CDMA | LTE | 5G |
|---|---|---|---|---|
Generations | 2G | 2G, 3G | 4G | 5G |
Multiple Access Technique | TDMA | CDMA | OFDMA | OFDMA, SC-FDMA |
Data Transfer Speeds | Up to 384 Kbps (GPRS/EDGE) | Up to 2.4 Mbps (CDMA2000 1xRTT) | Up to 100 Mbps (LTE) | Up to 10 Gbps (5G) |
Latency | Moderate | Moderate | Low | Ultra-Low |
Spectral Efficiency | Low | Moderate | High | Very High |
Frequency Bands | Various (850 MHz, 900 MHz, 1800 MHz, 1900 MHz) | Various (450 MHz, 800 MHz, 1900 MHz, 2100 MHz) | Various (700 MHz, 800 MHz, 1800 MHz, 2600 MHz) | Various (Sub-6 GHz, mmWave) |
Usage | Global | Global | Global | Global |
Key Advantages | Wide coverage, voice-centric, backward compatibility | Increased capacity, better call quality, backward compatibility | High-speed data, low latency, efficient spectrum utilization | Ultra-high data rates, ultra-low latency, massive device connectivity |
Key Applications | Voice calls, text messaging | Voice and data services | Mobile internet, video streaming, real-time applications | IoT, augmented reality, autonomous vehicles, mission-critical communications |
Visit the 1NCE Shop and start connecting your IoT devices easily. Simply choose the desired type of SIM card, order your SIM cards, and fill out all required forms. After the payment has been approved you will receive your cards within two to three business days.
